Most puzzle enthusiasts like to keep the puzzle, especially when it comes to 1000 or more, as the work is a tribute to his patience and his. The maintenance of a puzzle assembly, lamination and framing would allow others to enjoy his hobby, and serve as a beautiful decorative piece on the wall.
After patiently put together the puzzle, you should carefully a thin piece of plastic between the bottom of the puzzleand the area you are working. This is the counter or table in front of sticky residue, which often seeps through their prevention.
You should then glue evenly over the top (photo) surface of the puzzle. It could be soft wooden sticks used to compress the puzzle, while sticking to wait an hour or two for them to dry. You could then apply a second coat of glue. Several thin layers, like a thick layer of shares as to prevent or reverse image of flatulenceSwellings on. You could use a sponge to apply or use the applicator provided.
thick glue would not stick a few pieces of the puzzle larger than a liquid would be better for tight fitting puzzle. A polished surface could be applied to irregular shapes that can be coupled or not the images are too large to be framed.
Once the puzzle is completely dried can be reversed. It can then be pasted on the back to mount on a sheet of plywood cut to size. ALaminate can, if desired, or to protect the surface with an acrylic spray-spray for protection against dust and other contaminants. It could also be mounted on a sheet of polystyrene with rubber cement and then fit in a wooden frame.
One's Jigsaw is now ready, or a particular preference to be viewed as a gift to one.
No comments:
Post a Comment