Most puzzle enthusiasts like to keep the puzzle, especially if closer or 1000, the work is a tribute to his patience and his own. The maintenance of a puzzle assembly, and coupling structure will allow others to enjoy his hobby, and serve as a beautiful decorative piece on the wall.
After patiently put together the puzzle, you should carefully a thin piece of plastic between the bottom of the puzzleand the surface you are working. This is the desk or table in front of adhesive residue, which often seeps through their prevention.
You should then evenly with a sticker on the top (photo) of the surface of the puzzle. It could be soft wooden sticks, to compress the puzzle while gluing and wait an hour or two to dry. You could then another layer of glue. Several thin layers, like a thick coating to prevent the contrast of the image or parts of flatusSwelling. You could use a sponge applicator for the application or provided.
Po 'glue thickness is important piece in this puzzle, a liquid adhesive would be best to mount near-puzzle. A polished surface could be used for irregular shapes, or images are not too large, framed, are to be laminated can be used.
Once the puzzle is completely dry, can be transformed. It can then be cut to fit your back on a sheet of plywood to be glued to measure. ALaminate could, if desired, or to protect the surface with a spray acrylic spray of dust and other contaminants. You could even fit on a sheet of polystyrene with rubber solution and then inserted into a wooden frame.
A puzzle is ready, or a particular preference to be viewed as a gift.
No comments:
Post a Comment